| |
|
| |
Global Partners
Exclusive Representative Contract
with Global Companies |
|
|
|
|
Precise Time & Frequency for Metrology > Conversion > A6-1PPS |
| |
|
The A6-1PPS uses a three-state Kalman filter algorithm to measure
and correct the frequency offset of the oscillator with respect to the 1pps
input.
Features
|
- A time tagging circuit which time tags the incoming 1pps with a resolution
of 200ps, and an inherent jitter of < 1ns rms. The internal clock analogue
interpolator is self calibrating.
- An interface to the GPS receiver decodes messages and extracts relevant
information, such as time correction data for the 1pps output.
- A 1pps output which has the short term stability of the rubidium/ OCXO (
jitter <100ps RMS). This output may be steered into time coincidence with GPS
time/UTC. Steering resolution is 1ns.
- Holdover mode is initiated by failure of the 1pps input, or by reception of
appropriate data from the GPS receiver that indicates that the 1pps is
inaccurate. During holdover measured values of frequency offset and drift is
used to steer the oscillator. The output 1pps will still be available.
- A comprehensive computer interface that can be used to monitor the progress
of the Kalman filter, and to set parameters for the type of oscillator to be
controlled. communication with the GPS receiver is possible through the single
interface. Operating parameters are stored in non volatile memory.
Standard Specification:
| Output Frequency |
1Hz
|
| 1 PPS Output |
1 |
| Number of Outputs |
1 |
Product Options:
This product can have the following
options applied to change its specification
Option N - No Options Available
| |
| | |
